Implementing and Configuring Cisco Identity Services Engine (SISE) (300-715) Exam Prep
Free practice questions

Free SISE Practice Questions

10 exam-style questions with answers and explanations, straight from our 1,030-question bank. Tap an answer to check yourself. When you're ready, take the scored version in the free practice test.

Start the free practice test → ★★★★★4.9/5 from 2,400+ candidates · No signup

These 10 free SISE questions are organized by exam domain, so you can see how each part of the Implementing and Configuring Cisco Identity Services Engine (SISE) (300-715) blueprint is tested. Reveal the answer and explanation under each question.

Domain 1: Architecture and Deployment 10% of exam

Question 1

An ISE 3.4 PSN VM has the 24 vCPUs and 32 GB of RAM required for its selected SNS 3715-equivalent size. Authentication slows when neighboring VMs become busy. ESXi telemetry shows CPU contention and memory reclamation affecting the PSN; its CPU and memory reservations are both zero. Network, DNS, and AD response times are normal. Select the infrastructure correction supported by this evidence.

Show answer & explanation

Correct answer: B - Reserve the required CPU and RAM on a host with adequate capacity.

Domain 2: Policy Enforcement 25% of exam

Question 2

A label printer authenticates by MAB and belongs to WarehousePrinters. Its ISE policy set contains these ordinary authorization rules, evaluated in the order shown; no exception rules apply: 1. MAB → FullAccess, permitting all IP traffic 2. MAB AND WarehousePrinters → PrintOnly, permitting DNS and approved printing flows 3. All other requests → DenyAccess The printer receives FullAccess. At the next authorization evaluation, what change will select PrintOnly for these printers while preserving the treatment of other MAB endpoints?

Show answer & explanation

Correct answer: C - Move rule 2 above rule 1, keeping both rules' conditions.

Question 3

Three workstations share a Catalyst access port through a downstream device that forwards their 802.1X exchanges. Before authentication, ordinary IP access must be limited to DHCP and DNS. Each workstation must then authenticate separately and receive its own authorization; one successful login must not admit the others. Which deployment-mode and host-mode pairing satisfies both requirements?

Show answer & explanation

Correct answer: A - Low-impact mode with multi-auth authentication

Domain 3: Web Auth and Guest Services 15% of exam

Question 4

A guest successfully signs in through ISE central web authentication, yet the NAD keeps the initial redirect authorization. The account is valid. ISE records a CoA timeout, followed by no new RADIUS Access-Request. Manually reauthenticating that session immediately produces the intended GuestInternet profile. These results isolate the fault to which part of the flow?

Show answer & explanation

Correct answer: D - The PSN-to-NAD CoA path and the NAD's dynamic-authorization settings.

Question 5

At a reception shift handover, one sponsor can extend guests they created but cannot manage a colleague's active guest account. Both sponsors belong only to Reception; HR sponsors belong to a separate group. Extension permission is already enabled. Reception staff need to cover each other's guests without administering HR's accounts. How should Reception's management scope change?

Show answer & explanation

Correct answer: A - Allow management of accounts created by members of its sponsor group.

Domain 4: Profiler 15% of exam

Question 6

A profiling-policy test evaluates an endpoint against two enabled, administrator-created root profiles: • Office-Printer: minimum certainty factor 70; matching rules contribute 20 and 30. • Generic-Printer: minimum certainty factor 35; one matching rule contributes 45. No other rules or profiles match, and neither profile has a parent. How should the endpoint be classified?

Show answer & explanation

Correct answer: B - Generic-Printer: 45 exceeds its minimum; Office-Printer's 50 falls short.

Domain 5: BYOD 15% of exam

Question 7

After an EAP server certificate change, newly onboarded personal laptops connect to the corporate WLAN, but older BYOD laptops fail. Affected laptops reject the approved new root CA; a capture confirms that the PSN supplies all required intermediate certificates. The expected server name and validity dates are correct. The laptops' client certificates and private keys remain valid, and ISE trusts their issuer. Where does the repair belong?

Show answer & explanation

Correct answer: A - Update the affected laptops' EAP trust configuration with the approved CA chain.

Question 8

Security confirms that a stolen BYOD laptop is still connected to the corporate WLAN. An administrator marks it Stolen: its ISE-issued endpoint certificate is revoked and it enters Blocked List. A top-priority authorization rule denies that group, but the resulting session-termination request has failed and the WLC is still forwarding traffic under the earlier authorization. What must be done now to contain this connection?

Show answer & explanation

Correct answer: D - Terminate the laptop's active session on the WLC.

Domain 6: Endpoint Compliance 10% of exam

Question 9

A Windows pilot in the ISE Posture Work Center assigns three requirements: • Firewall enabled - Mandatory: passes. • Approved backup utility installed - Optional: fails; the user chooses to continue without remediating it. • Disk encrypted - Audit: fails. Assessment completes, and no other requirements apply. Authorization maps Compliant to CorporateAccess, Noncompliant to RemediationOnly, and Unknown to ClientProvisioning. Which status and access result should follow?

Show answer & explanation

Correct answer: C - Compliant → CorporateAccess; every mandatory requirement has passed.

Domain 7: Network Access Device Administration 10% of exam

Question 10

An IOS XE switch requests TACACS+ authorization for reload with no arguments and for show running-config. The operator has privilege 15. ISE selects both command sets below: Operations: reload → Deny; show with argument ^running-config$ → Permit. Maintenance: reload → Permit; show with argument ^running-config$ → Deny Always. Neither set permits unlisted commands. Predict the two authorization results.

Show answer & explanation

Correct answer: D - reload: Permit; show running-config: Deny.

That's 10 of 1,030

The full bank has 1,020 more SISE questions with explanations.

Continue in the free practice test →

View plans